1 1/2" Pro PVC Ball Valve 24V AC/DC
Built-In Unions for Easy Valve Removal or Replacement
Built-In Allen Wrench to Manually Open or Close the Valve
Adjustable from Normally Closed to Normally Open
Anti-Stick / Self-Cleaning Valve
Full Port Ball Valve, No Flow Restriction
Auto Return Capacitor
Corrosion Resistant PVC Internals
Tested to 70,000 Cycles
24V AC/DC
EPDM Seals
IP67 Rated
2-Way Valve
- 19.6" Cable
ATTENTION GROWLINK USERS
THE PRO VALVE IS NOT COMPATIBLE WITH GROWLINK DC POWERED PIC CONTROLLER.
IT IS COMPATIBLE WITH AC POWERED PIC CONTROLLER, CONNECT CONTROLLER AND ALL COMMERCIAL GROWLINK UL PANELS.
ATTENTION TROLMASTER USERS
THE PRO VALVE IS NOT COMPATIBLE WITH TROLMASTER OA6-24 CONTROL MODULE. WHEN USING TROLMASTER, USE THE OAT-24 CONTROL MODULE WITH THE AQUA-X PRO.
IMPORTANT INSTALLATION NOTES
When gluing the socket fittings be sure not to use excessive amounts of glue or primer. Over-gluing the socket will push glue into the valve and weld the union/ball closed. Primer or glue on the internal ball of the valve will void warranty.
We recommend removing the valve from the socket end and gluing the socket and union lock ring to the pipe prior to installation of the valve.
Valves need a minimum runtime of 30 seconds in order to charge the return capacitor. Failure to do so will result in the valve not fulling closing.
Required amperage to open valve is 1.0 Amp at 24VAC/24VDC. Voltage will drop and stabilize at ~0.2 Amps after the ball has fully opened.
Please see our Warranty page for full warranty details.
Free domestic shipping on orders over $5,000
- Free shipping is only available to the Continental US (Lower 48 States, not including Alaska and Hawaii).
- To receive free shipping for domestic orders your cart must meet the $5,000 requirement before sales tax.
30 Day Return Policy
We accept returns of unopened/unused products within 30 days of purchase.
Prior authorization is required. To initiate a return, please complete the following steps:
- Send an email to orders@imperium-controls.com. Please include the order or invoice number, date of purchase and items to be returned.
- Mail packaged items to: Imperium Controls, ATTN: Chris Soto, 1930 Caterpillar Court, Jurupa Valley, 92509
- Send tracking information to orders@imperium-controls.com
- Refunds will be credited to the original payment method
- PLEASE NOTE: customer is responsible for paying return shipping
If you are experiencing problems or defects that you believe are covered under warranty, please fill out our Return Merchandise Authorization (RMA) form.- Send an email to orders@imperium-controls.com. Please include the order or invoice number, date of purchase and items to be returned.